Large Sale of KUKA, COMAU, ABB, FANUC, MOTOMAN Robots, welding, loading and more
Starts: 16 April 2026 at 14:00 BST
Ends: 28 May 2026 at 14:00 BST
Due to relocation of company sale of big selection of robots from KUKA, COMAU, ABB, FANUC, MOTOMAN. Robots for welding, loading, painting, grinding and more. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 40 of 40 lots
- LOT 1
![site]()
2022 IPG Photonics GENESIS YLR 1500 WC 1.5kW Laser Welder
Cell Model: SYSLC0000058U, S/No: PD206000, Power Supply: 380–415 VAC Phases: 3P + N + PE , Frequency: 50/60 Hz , Full Load Current: 25 FLA Overcurrent Protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA. Circuit Diagram: DOCCHSDMPSXX0225 , Laser Source Model: YLR-1500-WC, S/No: PLMP32200563, Power Supply: 200–240 VAC, 1 Phase, 50/60 Hz , Rated Power: 4500 VA , Chiller – IPG Photonics , Model: LC71.01-A.4.5/6 , S/No: PC220200019 , Power Supply: 400/480 V, 3~ (3-phase), 50/60 Hz, Overcurrent Protection: 30 A / Type 1 Short Circuit Current: 50 kA, Rated Full Load Current: 16/17 A, Motor Current (Max Motor Load): M1 5.5 A, Circuit Diagram: P35-001221, Cooling Capacity: 5.5 / 5.9 kW. Refrigerant: R407-C, 2.2 kg, Maximum Operating Pressure: 30 bar - LOT 2
![site]()
2019 FANUC Arc Mate 100iD 6 Axis Welding Robot Cell with Fanuc System R-30iB Plus Robot Controller
Axles: 6. Range: 1441mm. Load: 12kg, Control: Fanuc System R-30iB Plus robot controller, Housing 2 m x 2 m x 2.7 m, Note: without Kemper exhaust - LOT 3
![site]()
2008 KUKA KoM-18000-UTV-D575 18T Heavy Duty Mobile Platform
S/No: : 161 015. Total Weight: 6000 kg. Payload/Load Capacity: 18 t. Specially designed wheels allow the platform to move in all directions, even from a resting position. The platform is controlled by a remote control. - LOT 4
![site]()
2018 Universal UR10 Welding Robot with Lorch Welder
Reach: 1300 mm, Load capacity: 12.5 kg, Weight: 33.5 kg, Type: MSIP-REM-URK-UR10, S/No: S300711, Lorch S5 RoboMIG XT Cobot Welder, 400 A Welder - LOT 5
![site]()
2018 KUKA KR6 R1820 TIG Welding Cell with KUKA KR C4 Controller
Rotating welding table with two interchangeable frames, KUKA KR6 R1820 industrial robot arm, S/No: 425602, Weight: 168 kg, Max. payload: 6 kg, Reach: 1820 mm, Control: KUKA KR C4, S/No: 380929, Weight: 123 kg, Welder: Dinse DIX TIG 350 AC/DC TIG, S/No: 19840519, (2008) TEKA Caremaster BIA welding fume extraction units (2 units), Performance: 2200 m³/h, Connection parameters: 400 V / 50 Hz / 2.5 A, Power: 1.1 kW, Weight: 125 kg / pc., 6-section steel cabinet, Equipped with additional accessories - LOT 6
![site]()
2022 Comau NJ 110-3.0 6 Axis Robot Arm
Axles: 6 axles, Maximum load: 110 kg, Maximum reach: 2980 mm - LOT 7
![site]()
2021 Comau Smart-5-NJ40-2.5 6 Axis Robot Arm
Axles: 6 axes, Maximum load: 40 kg, Maximum reach: 2503 mm - LOT 8
![site]()
2018 Comau SMART5 NS 16-1.65 6 Axis Robot Arm with COMAU C5G ACC1-E Controller
Axles: 6, Weight: 340 kg, Control: COMAU C5G ACC1-E, Remote control: TPS Will Best remote control, Model: Comau Robotics C5G ACC1-E, S/No: 2404050, Application: Positioning system integrated with a resistance welding system, Installed system: TPS Will Best – UF40 DC resistance welding remote control system, Enclosure: Free-standing aluminum and glass enclosure, dimensions 4000 x 4000 mm - LOT 9
![site]()
2018 Comau Smart 5 NJ 4 220-2.7 6 Axis Robot Arm
Axes: 6, Maximum load: 220 kg, Working radius: 2738 mm, Repeatability: 0.15 mm - LOT 10
![site]()
2017 ABB IRB 1600 Painting Robot Cell with IRC5 Controller
Maximum reach: 1200 mm, Control: IRC5, Rotary table - LOT 11
![site]()
2016 ABB IRB 6700-205/2.80 6 Axis Robot Arm with IRC5 Controller
Axles: 6, Maximum load: 205kg, Maximum reach: 2.800mm, Control: IRC5, Weight: 1260 kg - LOT 12
![site]()
2018 NEW/Unused Doosan M1509 Cobot
Maximum load: 15kg, Maximum reach: 900 mm, Tool speed: 1 m/s, Repeatability: ±0.05 mm, Weight: 31 kg - LOT 13
![site]()
2018 NEW/Unused Doosan M0609 Cobot
Maximum load: 6kg, Maximum reach: 900 mm, Tool speed: 1 m/s, Repeatability: ±0.05 mm, Weight: 27 kg - LOT 14
![site]()
2015 ICS Cell with robot Hyundai YS080M with Panasonic WG III Controller
Reach: 2239 mm, Control: Panasonic WG III, Load capacity: 80 kg, For ultrasonic cleaning - LOT 15
![site]()
2017 Fanuc 200iD7L 6 Axis Welding Robot with Kempi A7 450 A Welder and R-30iB Plus Controller
Control: R-30iB Plus, Number of axes: 6, Payload: 7 kg, Reach: 911 mm, Repeatability: ±0.01 mm, Robot weight: 27 kg, Welder: KEMPI A7 450 A welding power source with integrated cooling unit, wire feeder, torch, touch measurement of the workpiece using welding wire, laser measurement of the workpiece, TAST software function, horizontal travel along a curved line, vertical travel, safety system - LOT 16
![site]()
2018 Kawasaki RS080N B 6 Axis Robot Arm with Kawasaki E02G-A001 Controller
S/No: RS0801227. Axles: 6. Control: Kawasaki E02G-A001. - LOT 17
![site]()
2019 Nachi MC50-01 6 Axis Robot Arm with Nachi FD-11 Controller
S/No: B1971008. Axles: 6, Maximum reach: 2050 mm, Maximum load: 50 kg. Control: Nachi FD-11. Weight: 640 kg. Control weight: 175 kg. - LOT 18
![site]()
2015 Nachi MC50-01 6 Axis Robot Arm with Nachi FD-11 Controller
S/No: B151G532. Axles: 6, Maximum reach: 2050 mm, Maximum load: 50 kg, Control: Nachi FD-11. Weight: 640 kg. Control weight: 175 kg - LOT 19
![site]()
2016 UNIVERSAL UR5-CB3.1 Robot Arm
S/No: 2016351781. Reach: 850 mm, Payload: 5 kg, Robot weight: 18.4 kg, Ingress protection: IP54, Includes: Touchscreen tablet, Robot arm, Robot controller Note: The price includes only the robot arm with remote control and control cabinet, not the additional hardware shown in the photo - LOT 20
![site]()
- LOT 21
![site]()
2023 NEW OKIO – M5 Grinding 6 Axis Robot Arm with orbital sander
Includes orbital sander and 6-axis force sensor, Axles: 6, Load capacity: 5 kg, Reach: 922 mm - LOT 22
![site]()
2023 NEW OKIO AB6-C1400 TIG 6 Axis Welding Robot Arm
Number of axes: 6, Reach: 1400 mm, Maximum payload: 6 kg, Controller, Remote control, Wire feeder, Welding power source: TIG WSM400R, Cooling unit - LOT 23
![site]()
2023 NEW OKIO 2000W automatic 4-axis 2kW Fiber Laser Welder
Power: 2 kW, Number of axes: 4, X-axis travel: 500 mm, Y-axis travel: 300 mm, Z-axis travel: 300 mm, Worktable dimensions: 350 mm × 450 mm, Travel speeds: Y-axis: 10 m/min, X-axis: 10 m/min, Z-axis: 5 m/min, Positioning accuracy: ±0.02 mm, 4th axis: positioner, Rotation positioning accuracy: ≤0.05 mm, Power supply: 220V/380V, Power consumption: 7.5 kW, Device dimensions: 500×1400×1900mm, Weight: 280 kg, Refrigerator, Welding source: MAX, Mounting plate, welding head, CCD visual observation system - uses a high-resolution camera and monitor to improve welding efficiency and quality - LOT 24
![site]()
2013 KUKA KR6 R900 SIXX Milling Robot Arm with KRC4 Controller
S/No: 5000657. Load: 6 kg. Reach: 901 mm. Control: Kuka KRC4 - LOT 25
![site]()
2018 Comau Smart 5 NJ 4 220-2.7 6 Axis Robot Arm with C5G Controller
S/No: 2404570. Axles: 6. Maximum load: 220 kg. Working radius: 2738 mm. Repeatability: 0.15 mm. Control: C5G - LOT 26
![site]()
2018 Comau Smart 5 NJ 4 220-2.7 6 Axis Robot Arm with C5G Controller
Serial number: 2404603. Axles: 6. Maximum reach: 2700 mm. Rated load: 220 kg. Maximum payload: 220 kg. Positioning accuracy: ±0.06 mm. Robot weight: 1280 kg. Control: C5G ACC3 E. Remote control: TP5 - LOT 27
![site]()
2018 Comau Smart 5 NJ 4 220-2.7 6 Axis Robot Arm with C5G Controller
S/No: 2404573. Axles: 6. Maximum reach: 2700 mm. Rated load: 220 kg. Maximum payload: 220 kg. Positioning accuracy: ±0.06 mm. Robot weight: 1280 kg. Control: C5G ACC3 E. Remote control: TP5 - LOT 28
![site]()
2018 Comau Smart 5 NJ 4 220-2.7 6 Axis Robot Arm with C5G ACC3 E Controller
Serial number: 2404605. Axles: 6. Maximum reach: 2700 mm. Rated load: 220 kg. Maximum payload: 220 kg. Positioning accuracy: ±0.06 mm. Robot weight: 1280 kg. Control: C5G ACC3 E. Remote control: TP5 - LOT 29
![site]()
2010 ABB IRB 2400L Robot Arm with IRC5 Controller
S/No: 24-65815. Reach: 1800 mm. Control: IRC5 M2004. Load: 7 kg. Note: Missing pilot - LOT 30
![site]()
2015 ABB IRB 2400L Robot Arm with ABB S4CPlus Control
S/No: 24-50228. Reach: 1800mm. Control: ABB S4CPlus M2000. Load: 7kg - LOT 31
![site]()
2015 ABB IRB 2600-20/1.65 Robot Arm with IRC5 Controller
S/No: 2600-105224. Reach: 1650mm. Load: 20kg. Control: IRC5. Note: Missing pilot - LOT 32
![site]()
2015 ABB IRB 2600-12/1.85 Robot Arm with IRC5 Controller
S/No: 2600-104318. Reach: 1850mm. Load: 12kg. Control: IRC5 - LOT 33
![site]()
2014 ABB IRB 140-6/0.8 Robot Arm with IRC5 Controller
S/No: 140-102898. Reach: 810mm. Load: 6kg. Control: IRC5 - LOT 34
![site]()
2010 Hyundai HS200 Palletizing Robot with Hi5-N00 Controller
S/No: HB20-469-552. Reach: 2666mm. Control: Hi5-N00. Load: 200 kg - LOT 35
![site]()
- LOT 36
![site]()
2011 Yaskawa Motoman KrauSS Maffei YR-HP0020D-B00 Robot Arm with DX100 Controller
Reach: 1717 mm. Load: 20 kg. Control: DX100 - LOT 37
![site]()
2009 DENSO KLS VS-6556EE 6 Axis Pick-and-place Robot Arm with RC5-VSE6BA-BP Controller
S/No: 02F133. Number of axes: 6. Control: RC5-VSE6BA-BP. With KRUPS conveyor belts. Reading system, automatic picking. No remote control cable included - LOT 38
![site]()
2014 Denso Robot Arm
Reach: 505 mm. Payload: 4 kg. Robot weight: 28 kg. Control: Control module + handheld controller. Robot table: Profile frame, approx. 800 × 960 mm - LOT 39
![site]()
2008 Robotic leak testing cell with FANUC LR Mate 200iC/5L Robot Arm
Measuring table equipped with 8 light curtains. 2 Innomatec LTC-502 leak testing devices. The entire system is equipped with a safety system and CE marking - LOT 40
![site]()
2007 Fanuc LR Mate 200 iC (E-29388) 6 axis Robot with in-cell vision system with R-30iA MATE Controller
Control: R-30iA MATE. Number of axes: 6. Payload: 5 kg. Reach: 704 mm. Repeatability: ± 0.02 mm. Robot weight: 27 kg. Camera: Sony XC-56
Essential Information
General Information
- Auction Dates
- Starts: 16 April 2026 at 14:00 BSTEnds: 28 May 2026 at 14:00 BST
- Site Address
- Częstochowa42-202 Poland
- Viewing Days
- By Appointment OnlyBy Appointment Only. Please contact Apex to make an appointment.
Fees & Payment
- Currency
- EUR
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- A link to the invoice will be emailed to successful bidders
- Payment is due immediately on receipt of invoice
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque
- NB: Please reference invoice number on bank transfer.
Goods
- Clearance days
- 08 June 2026 at 07:00 BST - 12 June 2026 at 15:00 BSTCollections strictly by appointment only.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all transport and rigging charges.
- Items are only available for collection once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- For a list of companies that can assist with removals and transportation please visit the Apex Auctions website's Service Providers section.
- Sales Contacts
- Auction informationZuzanna Bodziachowska-KluzaAlmax Spolka Cywilna
Częstochowa
42-200
Poland zkluza@apex-group.com+48 34 888 1030